Concrete is the most versatile material employed for the building of infrastructure. When concrete slips, the foundation of your structure is in danger. Uneven concrete not only looks poor, but it might be a hazard.

Concrete can fail for a array of reasons. It’s a material that is durable but damages easily. It still needs a solid foundation despite the fact that it’s one of the strongest building materials around. Well designed, properly assembled reinforced concrete is durable in most environments.

It might be frustrating to consider whenever your flooring has flaws like uneven or sloped surfaces. Uneven flooring may also grow into a hazard for family members and friends. Sinking or uneven concrete floors in your house or wet basement is an inconvenience but the moisture, dampness and mold may cause health difficulties and large repair expenses.

In years past you spend an exorbitant quantity of money to take the slab out or live with the damage and then replace it with a pour. When concrete damage gets evident, it might be more than an eyesore. Water infiltrating the surface will further erode the crack and may cause rebar contained within the concrete to rust – commonly called concrete cancer.

These repairs would be defects during the plan and building of structures, or the effect of a change in use of an structure that is present. Concrete repair can’t be carried out by anyone. Addressing concrete repair is important to preservation efforts. Once an appropriate solution is defined, we could employ specialist concrete repairs to present an affordable method to address the job required.

If you possess a concern permit your house to be inspected by the experts. There are signals of concrete failure. In case you have some queries around those concrete repair services make certain that you get in touch with a concrete crack repair contractor.

When you call our concrete repair specialists, we will schedule a convenient time to go to your house to perform a comprehensive walkthrough of your issues. After we’ve obtained a detailed report of everything you would really like to do, we’ll give you a quote.

You will have the ability to walk on the surface immediately, and you are likely to be parking your car on it. Provided that the surface is prepped it should endure for many years with no problems. It’s easy to spot if a concrete surface was ruined. Irregular, crumbling, along with sinking concrete surfaces can result in severe and costly damage if the matter is not taken care of properly or inside a timely method.

Cracks arise as a consequence of number of triggers, and there’s no way to be aware of the origin. Otherwise, the fractures will return in a time period. Cracking As mentioned previously, locating a crack on your concrete is never a good sight. Whether there are lots of cracks and they too deep and the gaps too big, it may be practical to have the full slab replaced.

Because they are long-lasting, attractive and easy to keep clean polished concrete floors are gaining widespread recognition throughout the world. Sealers protect your concrete flooring from weather, grease and salt stains. Before sealing your concrete flooring, first clean up the area and remove as numerous stains as you can. Professional floor sealing can be realised in a number of ways, which is likely to do it yourself, but the outcomes of a floor covered by an experienced and accredited technician takes the guesswork out of the process.

Selecting the Most Appropriate Sealer

Picking the right sealer type may prove to be challenging. Understanding the basic types help you select the correct one. Penetrating sealers penetrate the cement to offer maximum protection. Penetrating sealers are capable of shielding concrete surfaces for a long time. Topical sealers simply protect the surface of the cement. Protection that is significantly less in the long-term by these kinds of sealers offering a shorter life span than penetrating sealers.

Following are the three most common sealants in this group:

Polymer – Sealers may be either water-based or solvent-based and are cheap. Water-based polymer is not difficult to implement but may distort the shade of your floor. Solvent-based polymer supplies a deep, transparent finish, but it’s a robust smell and might yellow eventually.

PU – Polyurethane sealers type a highly protective coating on the floor and can be used for outdoor and interior applications. It is highly sensitive throughout its curing period that is extended, although the coating is almost twice as thick as the one created by acrylic.

Epoxy – Epoxy is the recommended sealer for most concrete floorings. It is impermeable to drinks, extremely tough and abrasion-resistant. Adhesive may resist heavy traffic, and it’s also available in clear along with a wide selection of sleek colours. Epoxy films will endure for many years until they must be reapplied.

Infiltrating sealers enter the follicles in the cement and create a substance reaction that strengthens and hardens the floor. Most penetrating sealers are entirely undetectable, and they may be used together with topical sealers for extra protection.

Preparing the Floor

After the sealant that’s better for your needs has been chosen by you, you’ll need to ready the floor. You will wish to ensure the weather is warm and dry, when you want to seal your floor. While the heat won’t change the strength of the sealant while it’s curing, you will need to prevent temperatures getting cooler.

You’ll be able to sweep the floor to eliminate debris and grime once the current weather is is at the ideal. Give it time to completely dry, and then mop the surface. If possible, the flooring also can be pressure washed.

Fast-setting cement patching is ideal for filling holes, cracks and crevices in the area that is tangible. The substance is an easy task to apply utilising caulk gun and a putty blade. Filling the cracks in the concrete area not only offers a surface that is smooth, but additionally eliminates larger cracks the sealer cannot fill.

In planning the floor, the following step will be to employ etchant or a de-greaser to get rid of fat or any oil on the concrete. Be sure to follow all safety recommendations when you implement this merchandise and maintain the room highly ventilated. Make use of a hard-bristled brush to to wash the floor clear. After rinsing the de-greaser from the ground, let it dry for 2 4 hrs. You will then be prepared to begin the particular process of concrete floor securing.

Implementing the Sealing

The sealer is applied as painting to the floor in a similar fashion. So your sealer doesn’t accidentally adhere to them, for this reason, you will wish to put painter’s tape along every one of the edges and in the underparts of the the partitions. Most experts advocate applying it using a roller brush and filling a paint tray, while some individuals prefer to apply the sealant having a garden sprayer or a spray gun. The sealer ought to be used as heavily as you possibly can, but always be sure, because not absolutely all sealers possess exactly the same properties, to follow the manufacturer’s directions.

The sealant should be spread round the edges of the area, halting at a specified exit. When the roller won’t reach, a paint brush can be used by you for the edges and sides. Once the sealant was spread round the edges, it is possible to apply it to the rest of flooring by starting at the far corner to ensure that you do box your-self and working toward the exit to the space.

The sealer will want 1-2 to 24 hrs to dry. After it dries, you’ll have a sturdy, durable seal which will protect appearance and the strength of your concrete floor for several years

Cement-centered microtoppings and over coats may be used both indoors and outside designs and to provide a clean canvas for cosmetic treatments, like stains. Some systems come pretinted in an array of colors, though others can be custom-tinted by mixing in the desirable quantity of liquid coloring agent. Using layers of different colours can achieves interesting colour variations. Some skim coats, such as Aftek deco flakes, may provide additional decorative finishes.

Before attempting to set up the skim coating dirt or any loose areas must be removed from the floor. This may involve utilizing a some other tool or a wire brush to free any stuff from the ground.

A spray tank is used to damp the floor, the that area of the flooring is sprayed with the skim coating

Some skim coat components are installed in two layers. The first coating is applied using a squeegee; this only coats the flooring and is allowed to dry. Use paintbrushes to use a level of the skim coat in edges where the squeegee can’t reach. Drying times will vary determined by the maker of the skim coat.

The second coat of skim coat is applied according to the manufacturers instructions. This skim layer is often mixed heavier compared to the first layer. The floor is again wet with a sprayer prior to the skim coating application.

The second coating is levelled with trowels instead of squeegees. The ideal degree of the skim coating is 1/8 inch. The skim coat is a viscous layer that will self-level filling gaps, cracks and sloping cloors to form a perfectly level sub-surface or top-coat.

Regions of the flooring is wet and the 2nd application of the skim coat is applied to the areas that are wet.

A typical concrete floor can be made by acid staining to look like natural stone flooring that is expensive. Is it a fraction of the price, but for folks sensitive to carpeting substances it’s a godsend. Another great application is in houses with radiant floor heating. Radiant heating is at its most efficient when insulating floor coverings like carpeting or tile are minimized.

The process of staining a concrete floor, while not overly complex, can be rough to get the results you want. It’s a risky project for the do it your self.

Concrete stain isn’t a paint or finish coat, if you’re not familiar with it. It entails a chemical reaction on concrete materials. Typically a water-based solution of hydrochloric acid and inorganic salts, the stain reacts with lime and minerals in the concrete aggregate, and the effect of the reaction is coloring. It works on new or old concrete, and is fairly permanent if you maintain it since it won’t wear or chip. It can also be put on both interiors and outdoor floors. Walks, bathrooms, entrances, driveways, living rooms and verandas are fair game.

Stained concrete seems a little like marble, but more dappled and less uniform. The concrete will largely be earthy tones that are brown, with hints of crimson and green. Plan your room décor and color scheme accordingly, because you will get dissimilar reactions from different places of the concrete, and also an experienced pro will be hard pressed to predict what the final result will be.

Surface prep for acid staining concrete depends upon what state your slab is in. Just poured concrete needs time for curing- three weeks after pouring- afterward some scrubbing and rinsing. Concrete that is old is a story that is different it will need to cleaned with a chemical cleaner to ensure it is free of paint residue and dust..

Newer poured concrete will need less stain than older concrete floorings. The stain is applied with a non-metallic brush or broom, working in the cooler morning or evening hours, rather than in the warmth of the day. Be careful to shield yourself from drips, spillage and fumes in the acid stain, manufacturers precautions must be followed.

It is recommended to apply a sealer agent when the floor is completely dry to protect it and allow it to be polished.

Should you be in the market for natural stone flooring, a new look for your cellar or patio, or just looking for new remodeling ideas, stained concrete is something you should look into.

Concrete Floor Protection

As concrete is an extremely porous substrate when used as a flooring material it can be easily stained or damaged. This makes it unsuitable for many household, commercial and industrial applications where aesthetics, sanitation or high traffic volume is a concern. Epoxy floor coatings remedy this by providing a long-lasting and durable surface coating which not only protects the concrete from stains but impact damage. This is especially applicable for:

  • Industrial factories
  • Food preparation environments and restaurants
  • Medical laboratories and Hospitals
  • Retail stores and Commercial offices
  • Warehouses and Factories
  • Workshops and Home Garages

Epoxy Flooring

Epoxy flooring is an easy to clean, stain resistant, chemical resistant, durable and most importantly cost effective flooring solution. It can be applied over cured concrete that has been levelled and cleaned. To achieve the best results an experienced flooring contractor should be used. Epoxy floors are formed by a chemical reaction between epoxy resin and a hardening agent it must be mixed correctly and applied promptly for a quality consistent surface. Once hardened it can be polished to a high-gloss finish and when the resin is combined with colours or aggregates it can produce not only a hard, slip resistant surface but a beautiful low-maintenance flooring solution.

Types of Epoxy Floors

There are different types of epoxy floors depending on the use of the floor and the quantity of traffic; standard epoxy coatings, self-levelling epoxy flooring, and heavy-duty epoxy flooring. Epoxy Epoxy coatings are perfect for providing an extra layer of protection to concrete floors. Self-levelling epoxy floors are thicker than epoxy coatings ranging from 1 mm to 3 mm and also compensate for floor un-eveness. This epoxy smoothes itself to create a level surface while it is hardening. Heavy-duty epoxy is used in workshops and industrial applications. These floors can be 5 mm to 12 mm thick. To provide strength and durability for heavy machinery usage sand and aggregates are added to the epoxy.

Concrete Floor Preparation

A smooth fat concrete surface is essential for applying and kind of floor coating. Effective and expert preparation of the floor surface is the key to achieving a professional and appealing finish.

Self-Levelling Compounds

Self-leveling compounds can correct uneven floors, repair damaged concrete, and provide a smooth surface for the application of coatings. These are a quick solution for smoothing and levelling damaged or uneven concrete as they set to a smooth surface without trowelling. Self-leveling overlays are poured or pumped onto the floor surface and then distributed evenly. To ensure a strong bond proper surface preparation is essential. Levelling compounds appearance can be altered by the application of dyes or stains making it suitable as a base for epoxy floors.

Aftek K 301 is a smoothing and levelling compound which is suitable for internal or external use and is weather and wear resistant. It is suitable for workshop and factory floors, light commercial, garages, walkways and footpaths. It dries within 2-3 hours and can be covered with polyurethane coatings or epoxy floor coatings.

Ardex K 15 is extremely versatile and can be applied over a wide variety of substrates and is a rapid drying floor levelling compound that can be covered in vinyl, timber or tiles.

Polished Concrete is the mixture of three distinct technologies applied to your concrete surface. By combining progress in flooring grinding machines, chemical substances and the most recent diamond polishing technologies creates a high-grade surface finish with outstanding wearing properties.

Polished concrete and the aesthetic allure of natural jewel combine the durability of concrete. The result is amazingly hardwearing, and is a gleaming end, that looks fantastic, but is also not difficult to keep. On the top of this, polished concrete flooring can be an environmentally sustainable choice of commercial concrete flooring.

It is possible to appreciate a polished concrete floor in both new and old building. For a functional workspace, or the purpose of creating a feature floor, the slab can be especially poured in new construction. In older buildings, existing slabs can be polished and ground to create a hard wearing and visually appealing floor.


  • Virtually never-ending selection of matrix colours and aggregates
  • Immune to most compounds, oils, food and water
  • Create an excellent feel to a “wow” variable designed to impress and your house
  • A great investment, immediately adding value to your own house
  • Easy clean, providing you with additional time to enjoy your lifestyle and to keep
  • Suited to allergy sufferers with pollen, dirt, less dust or other allergens
  • Combines nicely with natural materials like glass, stone & timber products

Grinding the surface of the concrete can produce a very smooth finish similar to polished concrete. Concrete grinding can give a decorative finish by removing the surface to exposes aggregates or deposited in the concrete for this purpose. 

Concrete grinders are used to level out uneven floors and to finish off joins, and while it really is frequently left into a concrete contractor to do the job the capable DIY fan can get to grips with it using a straightforward concrete grinding machine and tools. Experienced operators with grinding machines with different grinding discs, however will ensure the best result.

Concrete grinding is also used to remove old surfaces like paint, adhesives or previous concrete sealers to clean the concrete. Diamond grinding fixes imperfections in concrete surfaces by removing surface irregularities that can occur during construction, or by wearing and tear over time.

Floor covering removal and surface preparation is an important first step prior to any coating being applied. Using the most recent vacuum assisted grinding and shot blasting groundwork systems to economically remove membranes epoxies, adhesives and paint will result in the best final look and smoothness.

The process of grinding with grit and then diamond grit allows concrete resurfacing to a very high standard of even the most worn of concrete floors. Once the concrete is ground it generally needs a new concrete sealer to be applied to protect the surface or can be stained.

When it comes to new constructions irregular concrete floors are less unusual than it might seem. Concrete flooring slabs poured over a big area frequently have a small inaccuracy when closely inspected. While this can be due to setting and going a heavy and exceptionally wet stuff in a comparatively brief space of time, the issue is easily repaired with a self-levelling overlay.